Weekly Program; Anti Frost Function - Supra LESTO SC02 Instructions For Use Manual

the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
To eliminate the smell given off by the
appliance when used for the first time, it is
recommended to have it on at full power for 2
hours in a well-ventilated room.
Prepare the appliance according to the function
you wish to use:
USE
Extend the cableConnect the appliance to the
mains.Turn the appliance on, by using the on/
off switch (F)Turn the appliance on, by using
the on/off button (a)
CLOCK AND DAY OF WEEK SETTINGPress
the button (e) to adjust the days. Press buttons
(h) or (i) to select the current day.
M Monday
T Tuesday
W Wednesday
T Thursday
F Friday
S Saturday
S Sunday
Press the button (e) to adjust the time. Press
(h) or (i) to select the current time.
Press the button (e) to adjust the minutes.
Press (h) or (i) to select the time.
Press the button (e) to confirm and end the
date and time set up.
Press buttons (h) or (i) to set the temperature
ranging from 5°C to 35°C.
LCD screen will display the set temperature
and return to room temperature in 5s once it's
set.
Appliance will keep the room temperature at
the set temperature.
Once it reach the set temperature, appliance
will stop heating.
Once it's 1℃ lower than the setting, appliance
will start heating.

ANTI FROST FUNCTION

Press (c) until icon (III) appear to set the
appliance at anti-frost mode. Once it's set, the
appliance will keep the room temperature at
5℃ to avoid indoor frost all day long.
3-EN.indd 2 3-EN.indd 2

WEEKLY PROGRAM

It consists of configuring each day of the week
with a different program. It allowed to set 2
working period each day.
To set the weekly program, press button (d)
until indicator (M=Monday) flicker.
Press button (h) or (i). LCD screen will show
digit 1. This is the 1 working period of Monday.
st
Icon (II) flashes. Press (h) or (i) in order to
select the power in the working period, 1000W
or 2000W.
Appliance will stay att anti-frost mode during
the rest period (III).
Press (h) or (i) to set the working hour ranging
from 0 to 23.
Press button (d) to confirm.
Then minutes digit flashes, press (h) or (i).
Press button (d) to confirm.
Repeat the operation until the programming for
all the days of the week is completed.
Press button (d) once the weekly programming
has finished.
Example of weekly program
Current date and time : Monday – 18h38
1 working period : 6:00-10:00 in 2000W
st
2 working period : 18:00-22:00 in 2000W
nd
The rest of the time in anti-frost mode
TOWEL HEATING
Press button (b) once to turn on the towel rack
heating function, press again to turn it off.
31/3/22 18:25 31/3/22 18:25