Preferences - JVC EX-A1EB Instructions Manual

Preferences

The initial settings of the system can be changed
according to the environment the system is used
in.
NOTE
• Set the remote control mode selector to
AUDIO before using the number buttons.
• The top and bottom of the preference screen may
not be displayed on a wide TV. Adjust the picture
size on the TV.
Basic operations
1
Press CHOICE while the disc is
stopped or no disc is loaded
("NO DISC" is displayed).
• "SETTING" will appear on the display
window on the main unit and the following
screen will be displayed on the TV.
• Proceed with operations by following the
description on the TV screen.
LANGUAGE
NOTE
• If the selected language is not recorded on the disc,
the optimum language set for the disc will be
displayed.
• For a language code such as "AA", refer to the
A
" "
Language codes ( page 38).
Items
MENU LANGUAGE Select the language for the DVD VIDEO menu.
AUDIO LANGUAGE Select the audio language for the DVD VIDEO.
SUBTITLE
ON SCREEN
Cursor
LANGUAGE
(5 // /2 /3 )
/ENTER
Items
MONITOR
TYPE
Number
buttons
PICTURE
SOURCE
SCREEN
SAVER
MP3/JPEG
Advanced operations
Contents
Select the subtitle language for the DVD
VIDEO.
Select the language displayed on the
preference screens.
PICTURE
Contents ( : initial setting)
Select a display method suitable for your TV.
16 : 9 NORMAL:
Select this when the aspect ratio of your wide
TV is fixed to 16:9 (when playing a DVD
VIDEO recorded at 4:3, the system
automatically adjusts the screen width of the
output signal).
16 : 9 AUTO:
Select this when your TV is an ordinary wide
TV.
4 : 3 LB (Letter Box) :
Select this when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the black bars appear on the top and
bottom of the screen.
4 : 3 PS (Pan Scan):
Select this when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the left and right edges of the picture
will not be shown on the screen. (If the disc is
not compatible with Pan Scan, the picture will
be displayed at the Letter Box ratio.)
Select an item suitable to the video source.
AUTO:
The video source type (a video or film) is
automatically selected.
FILM:
Select this item when you want to view a film
or video recorded with the progressive scan
method.
VIDEO:
Select this item when you want to view a
normal video.
Select the Screen Saver mode between
OFF (Screen Saver activates when there is no
operation made for about 5 minutes since a
still picture was last displayed).
If there are both MP3 and JPEG files on a
disc, you can select which files to play. When
the preference has been changed, open/close
the tray and turn on the power again. (A disc
with only one of MP3 file or JPEG file recorded
can be played regardless of this preference.)
ON /
29