Technical Data; Accessories - Husqvarna 372 XPG X-TORQ Operator's Manual

Technical data

Engine
Cylinder displacement,
3
cu.in/cm
Idle speed, rpm
Maximum engine power
acc. to ISO 8893, kW/hp @
rpm
1
Ignition system
Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US
Pint/liter
Oil tank capacity, US Pint/
liter
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/
number of teeth
Saw chain speed at 133%
of maximum engine power
speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
585 - 006 - 03.07.2020
Technical data
Husqvarna 365 X-TORQ
4.31/70.7
2700
3.6/4.9 @ 10 200
NGK BPMR 7A
0.020/0.5
1.63/0.77
0.89/0.42
Automatic
14.1/6.4
Rim/7
99/30.2

Accessories

Husqvarna 372 XP X-
TORQ
4.31/70.7
2700
4.1/5.5 @ 10 200
NGK BPMR 7A
0.020/0.5
1.63/0.77
0.89/0.42
Automatic
14.5/6.6
Rim/7
99/30.2
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna 365 X-TORQ, 372 XP X-
TORQ, 372 XPG X-TORQ met the safety requirements
in ANSI B175.1-2012 and Canadian Standards
Association CSA Z62.1-15 (Chainsaws) and CSA
Z62.3-11 (R2016) (Chainsaw kickback), when equipped
Husqvarna 372 XPG X-
TORQ
4.31/70.7
2700
4.1/5.5 @ 10 200
NGK BPMR 7A
0.020/0.5
1.63/0.77
0.89/0.42
Automatic
14.9/6.8
Rim/7
99/30.2
35