Final Preparation - Ryobi RYRM8002 Assembly Manual

Electric zero turn mower
Table of Contents

Advertisement

Available languages

Available languages

BATTERY
COVER
CHECK TIRE PRESSURE
Check the air pressure in all tires before use. Improper air
pressure will affect handling, steering response, traction,
tire life, level cutting, and operator comfort. Be sure tires are
inflated to the pressure shown below.
NOTE: Tire pressure should only be measured or adjusted
when tires are cold.
Recommended
Pressure
WARNING:
Check the tire pressure carefully while inflating. Too much
air in the tire could cause the tire to burst, causing seri-
ous personal injury.
ASSEMBLY
FOAM
Fig. 6

FINAL PREPARATION

Front
Rear
19 PSI
18 PSI
Fig. 7
CHARGE THE MOWER
See Figure 9.
Mower batteries must be fully charged before first use. To
verify mower batteries are fully charged, check the battery
level indicator.
To charge:
 Insert charger plug into charging port on mower, making
sure it is properly connected.
 Connect charger to power supply using normal household
current of 120 V, AC only, 60 Hz.
 Do not charge in an area of extreme heat or cold.
 Remove the charger from the mower once it is fully charged
and ready for use.
8 — English
Fig. 8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ryrm8002can

Table of Contents