Bosch Professional GAS 15 L SFC Original Instructions Manual page 9

Wet/dry dust extractor
Container volume (gross/net)
Net volume (liquid)
Dust bag volume
A)
Max. vacuum
– Dust extractor
– Turbine
A)
Max. volume flow rate
– Dust extractor
– Turbine
Max. suction power
Area of pleated filter
Dust class
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
Protection rating
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
A)
Automatic start/stop
Rated voltage Maximum
power
CN 220–230 V 2000 W
KO 220–230 V 2000 W
TH 220–230 V 2000 W
ID 220–230 V 2000 W
VI 220–230 V 2000 W
ID 220–230 V 2000 W
A)
Permitted connected load of the connected power tool
(country-specific)
Assembly
Pull the plug out of the socket before cleaning or per-
u
forming maintenance on the vacuum cleaner, making
tool adjustments, changing accessories or putting
away the vacuum cleaner. This safety measure prevents
the vacuum cleaner from being started accidentally.
Fitting the vacuuming accessories (see figure A)
The vacuum hose (17) is equipped with a clip system which
can be used to connect vacuuming accessories (dust extrac-
tion adapter (18), curved nozzle (19)).
Bosch Power Tools
Fitting the nozzles and tubes
GAS 15 L SFC
– Push the curved nozzle (19) onto the vacuum hose (17)
l 19/15
until you hear both snap fasteners (24) on the vacuum
l 11.5
hose engage.
l 7.5
– Then attach the required extraction accessory (coarse
dirt nozzle, crevice nozzle, suction tube, etc.) firmly to
the curved nozzle (19).
hPa 202
– To remove the adapter, press the snap fasteners (24) in-
hPa 215
wards and pull apart the components.
Fitting the dust extraction adapter
l/s 50
– Push the dust extraction adapter (18) onto the vacuum
3
m /s 0.05
hose (17) until you hear both snap fasteners (24) on the
vacuum hose engage.
l/s 62
– To remove the adapter, press the snap fasteners (24) in-
3
m /s 0.062
wards and pull apart the components.
W 245
Fitting the holder for the vacuum hose (see
2
m 0.28
figure B)
L
– Slide the holder (14) for the vacuum hose (17) firmly into
kg 6.4
the adapter (25) provided for it from above until it clicks
into place.
/I
IPx4
Fitting the vacuum hose (see figure C)
– Insert the vacuum hose (17) firmly into the hose
adapter (2).
Note: The friction generated by the dust in the vacuum hose
and accessory during extraction causes an electrostatic
charge that the user may experience as static discharge (de-
Minimum power
pending on environmental factors and their physiological
state).
100 W
Bosch generally recommends using an anti-static vacuum
hose (accessory) to vacuum up fine dust and dry materials.
100 W
100 W
Inserting/removing the disposal bag or dust bag
100 W
(dry vacuuming) (see figures D1–D2)
100 W
For dry vacuuming, you can insert a disposal bag (20) or a
100 W dust bag (accessory) into the container (1). This makes the
dust easier to dispose of.
Inserting the disposal bag
– Open the catches (7) and remove the top part of the va-
cuum cleaner (6).
– Insert the disposal bag (20) into the container (1) with
the inlet facing forwards.
– Pull the inlet over the connection flange and all the way
into the recess of the connection flange.
– Make sure that the disposal bag (20) touches all the in-
side walls of the container (1).
– Fold the rest of the disposal bag (20) over the edge of the
container (1).
– Put the top part of the vacuum cleaner (6) on and close
the catches (7).
Removing and sealing the disposal bag
– Open the catches (7) and remove the top part of the va-
cuum cleaner (6).
English | 9
1 609 92A 6U3 | (01.07.2022)