Video CD Operations
Adjusting the picture and sound to suit preferences
If you select [MANUAL], you can
adjust the level of sharpness of
the picture and noise reduction.
1. Use
to select
SHARPNESS or NR LEVEL.
2. Use
to adjust the level.
Toward L : Reduce the effect.
Toward H : Enhance the effect.
92
You can change the picture quality and select the prefered audio channel.
To adjust the picture quality [VFP]
7
During playback
VIDEO FINE
1
Press
or
VFP
PROCESSOR
2
Within 10 seconds, select
the desired picture quality
by pressing
VFP
the front panel.
Each time you press the button, the
picture quality changes as follows:
NORMAL
SHARP
SOFT
MANUAL
NOTES
¶
To erase the VFP screen, press
¶
The VFP screen disappears if there are no operations for more than 10
seconds.
on the front panel.
The selected of the picture
quality tab lights up in yellow.
VIDEO FINE
or
on
PROCESSOR
.
ENTER
NORMAL
SHARP
SOFT
MANUAL
SHARPNESS
L
H
NR LEVEL
L
H
Adjusting bar