Initializing A Memory Card - JVC CU-VH1EXS Instructions Manual

To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 6 in "To Print All Still Images
(One Print For Each)" (
2
Press R or T to select
"CURRENT", and press
MENU. The DPOF screen
appears.
3
Press 3 or 5 to
select the desired file.
4
Press R or T to select the number indication
(00), and press MENU.
5
Select the number of prints
by pressing R to increase
number, or "T" to
decrease the number, and
press MENU.
Repeat steps 3 through 5
for the desired number
of prints.
The number of prints can be set up to 15.
To correct the number of prints, select the
image again and change the number.
6
Press R or T to select
"RETURN", and press
MENU. The "SAVE?"
appears.
If you did not change
any settings in step 3
through 5, the Menu
Screen reappears.
7
Press R or T to select "EXECUTE" to save the
setting you have just made, and press MENU.
To cancel selection, select "CANCEL".
To Reset The Number Of Prints
1
Perform steps 1 – 6 in "To Print All Still Images
(One Print For Each)" (
2
Press R or T to select "RESET", and press
MENU. The DPOF screen appears.
3
Press R or T to select "EXECUTE", and press
MENU. The normal playback screen appears.
To cancel selection, select "RETURN".
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
pg. 26).
DPOF
SHEETS
0 0
RETURN
DPOF
SHEETS
0 5
DPOF
SAVE?
EXECUTE
CANCEL
pg. 26).

Initializing A Memory Card

You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have been
protected, are cleared.
1
Open the LCD monitor fully.
Set the Video Output Mode Switch to "LCD
MONITOR". ( pg. 13)
2
Set the Playback Mode Switch to "MEMORY".
3
Set the Power Switch to "ON" while pressing
down the Lock Button located on the switch.
4
Press MENU. The Menu
Screen appears.
5
Press R or T to select
"FORMAT", and press
MENU. The FORMAT
screen appears.
6
Press R or T to select
"EXECUTE", and press
MENU. The memory card
is initialized.
When initialization is finished, "NO IMAGES
STORED" appears.
To cancel initialization, select "RETURN".
CAUTION:
Do not perform any other operation (such as
turning off the player) during initialization. Also,
be sure to use the provided AC Power Adapter/
Charger, as the memory card may be corrupted if
the battery becomes exhausted during
initialization.
27
EN
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
F ORMAT
ERASE AL L
EX I ST I NG DATA?
EXECUTE
RETURN