Table of Contents
Advertisement
Programming
Sub-menu 1
Auto intercom
Change language
(Display)
Main menu:
"Cust. Support"
Operation
Displaying customer support Web address.
*1
If you program these settings using one of the units, you do not need to program the same
item using another unit.
*2
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
*3
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select
"Manual". (Call Display subscribers only)
To use this feature, set the date and time first (page 13).
*4
If you subscribe to a distinctive ring service, select a tone (tone 1 to 2). If you select a
melody, you cannot distinguish lines by their ringers.
*5
The preset melodies in this product ("Tone 3" - "Melody 10") are used with permission of
© 2009 Copyrights Vision Inc.
*6
This setting is available when you have the key detector (KX-TGA20). Read the installation
manual for more information on the key detector.
*7
For models with supplied key detectors, the display shows "1: Detector1".
*8
If you register 2 or more key detectors.
*9
If you subscribe to a Call Display service and want to view the caller's information after lifting
up the handset to answer a call, turn off this feature.
*10 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*11 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
For assistance, visit www.panasonic.ca/english/support
34
Sub-menu 2
–
–
Settings
Code
On
#273
<Off>
<English>
#110
Français
Code
#680
19
13
–
Advertisement
Table of Contents
