Advertisement
Quick Links
Advertisement
Related Manuals for Westinghouse Opti-Pro WHIR03WA
Summary of Contents for Westinghouse Opti-Pro WHIR03WA
- Page 1 INSTRUCTION MANUAL 220~240V 2000 - 2400W 50Hz / 60Hz WHIR03WA 2400W...
-
Page 2: Table Of Contents
CONTENTS SAFETY INFORMATION Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3 Electrical Requirements . -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS DANGER WARNING CAUTION DANGER - Immediate hazards WARNING - Hazards or unsafe CAUTION - Hazards or unsafe which WILL result in severe practices which COULD result in practices which COULD result in personal injury or death. severe personal injury or death. minor personal injury. - Page 4 IMPORTANT SAFETY INSTRUCTIONS This iron is not intended for use by persons (including children) with reduced physical, sensory or metal capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the iron in a safe way by the person responsible for their safety, and understand the hazards involved.
-
Page 5: Electrical Requirements
If the power supply cord is too short, do not use an extension cord. Have a qualified electrician or serviceman install an outlet near the appliance. NOTE: Neither Westinghouse nor the retailer can accept any liability for damage to the product or personal injury resulting due to failure to observe the electrical connection procedures. -
Page 6: Parts And Features
PARTS AND FEATURES A. Temperature Dial J. Auto-off indicator light select desired ironing - Illuminates to indicate that the iron temperature for each garment. is heating and goes out when it has B. Tempreture Indicator Light reached the selected temperature. illuminates to indicate that the iron is - Light blinks... -
Page 7: Iron Operation
PARTS AND FEATURES - CONTINUED L. Ceramic Cera-Silk® Soleplate Glides easily across fabric for effortless ironing. M. Steam holes For producing continuous steam and powerful shots of steam. See Cleaning and care instructions on page 10 & 11. IRON OPERATION USING YOUR IRON FOR DRY IRONING Insert the plug into a power outlet and turn the power on. - Page 8 IRON OPERATION - CONTINUED SPRAYING The spray mist can be used for both dry and steam ironing at any temperature setting. Press the spray button to release a mist of water through the spray nozzle and dampen the fabric as required. NOTE: Before using the spray function ensure that the water tank is at least ¼...
- Page 9 IRON OPERATION - CONTINUED During use, the anti-drip system may emit a clicking sound, particularly during heat- up or when the iron is cooling down. This is normal and indicates that the anti-drip system is functioning correctly. CAUTION The iron must not be left unattended while it is connected to the supply mains.
- Page 10 For more information on Westinghouse small appliances, visit: www.westinghousesmallappliances.com.au...
-
Page 11: Troubleshooting
TROUBLE POSSIBLE CAUSE POSSIBLE SOLUTION The iron is unplugged from mains Check that the plug is power. connected to mains power. The temperature dial has not Check that the power switch at Not enough heat. been rotated from “0” position. power outlet is on. -
Page 12: Cleaning And Care
TROUBLESHOOTING - CONTINUED BEFORE CALLING FOR SERVICE If the iron fails to operate: Check to make sure the iron is plugged in correctly and securely. If it is not, remove the plug from the outlet, wait 10 seconds and plug it back in securely. Check for a blown or tripped circuit breaker in your home. - Page 13 CLEANING & CARE - CONTINUED TO CLEAN THE STEAM HOLES Use a cotton wool tip moistened with distilled water to remove any build-up from that may have blocked the steam holes. Use caution not to scratch or damage the soleplate. NOTE: Never carry or hang the iron for storage by the power cord.
-
Page 14: Warranty
Subject to Clause 1, the Seller warrants that Westinghouse branded products will be free of manufacturing defects and will perform to the Seller’s specifications subject to the following clauses. - Page 15 b.) Make note of the defects reported by the Owner. c.) Take back the defective goods from the owner and determine within a reasonable time through dialogue with the Seller whether the goods are defective. d.) Advise the owner within a reasonable time frame whether it accepts or rejects the Product claim.
- Page 16 11 Tamara Drive, Cockburn Central, WA 6164 MADE IN CHINA © 2015 RVM AUSTRALIA PTY LTD. ALL RIGHTS RESERVED. , WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF are trademarks of Westinghouse Electric Corporation. Used under license by RVM AUSTRALIA PTY LTD. ALL RIGHTS RESERVED.