Related Manuals for Clarion WXZ466MP
Summary of Contents for Clarion WXZ466MP
- Page 1 Owner’s manual WXZ466MP 2-DIN 6-disc CD/MP3/WMA Receiver / CeNET Control 2-DIN 6碟CD/MP3/WMA接收器/ CeNET控制 2DIN 6디스크 CD/MP3/WMA 리시버/CeNET 컨트롤...
-
Page 2: Table Of Contents
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable. -
Page 3: Precautions
2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the ro- tating parts. WXZ466MP... -
Page 4: Handling Compact Discs
If you try to play such a compact disc, you may not be able to get it back out of the CD player or it may damage the CD player. About a Single CD (8cm CD) •... -
Page 5: Controls
매우 추운 상태에서 화면의 움직임이 느려지고 화면이 어두워질 수도 있지만, 이것은 정상입니다. 통상적인 온도로 돌아가면 화면은 다시 원상태로 회복될 것입니다. Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter. WXZ466MP 화면 표시 항목 显示屏... -
Page 6: Nomenclature
• Stores a station into memory or recalls it directly while in the radio mode. • Selects the disc. WXZ466MP [A-MODE] knob (PUSH G.EQ) • Turn to select the folder. (MP3/WMA disc only) • Press to switch to the audio mode (LPO, D-Z LEVEL, G.EQ EDIT, BASS, TREBLE, BALANCE, FADER). -
Page 7: Major Button Operations When External Equipment Is Connected To This Unit
• Press to perform preset scan. Press and hold for 2 seconds or longer to perform auto store. [BAND] button • Switches the band. • Press and hold for 1 second or longer to switch seek or manual tuning. , ENT) , ENT) WXZ466MP... -
Page 8: Remote Control
5. REMOTE CONTROL WXZ466MP... -
Page 9: Functions Of The Remote Control Unit Buttons
All random play. Disc random play. Switches reception band. Moves preset channels up and down. No function. Preset scan. When pressed and held for 2 seconds or longer: Auto store. No function. Switches between TV and VTR. WXZ466MP... -
Page 10: Operations
TV mode AUX mode ∗ External equipment not connected through CeNET will not be displayed. WXZ466MP Note:Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold). Adjusting the volume 1. Turn the [VOLUME] knob to adjust the vol- ume. -
Page 11: Adjusting The Tone
LEVEL”. 2. Turn the [A-MODE] knob to adjust the level. ∗ The factory default setting is “MID”. (Adjust- ment LOW/MID/HIGH) 3. When the adjustment is complete, press the [A-MODE] knob several times until the func- tion mode is reached. WXZ466MP... -
Page 12: Adjusting The Balance
60/80/120 Hz) 4. When the adjustment is complete, press the [A-MODE] knob several times until the function mode is reached. WXZ466MP Adjusting the treble (Gain, Frequency) This adjustment can only be performed when the DZE is set to “DZE OFF”. -
Page 13: Radio Operations
1. Press the [BAND] button and select the de- sired band (FM or AM). 2. Press and hold the [SEARCH] knob for 2 seconds or longer. The stations with good re- ception are stored automatically to the preset channels. WXZ466MP... -
Page 14: Cd/Mp3/Wma Operations
“ISR” appears in the display. Press the [ISR] button again to return to the previous mode. WXZ466MP CD/MP3/WMA Operations MP3/WMA What is MP3? MP3 is an audio compression method and clas- sified into audio layer 3 of MPEG standards. -
Page 15: Loading A Cd
IN” disappears and the shutter is closed, and you Play MP3/WMA cannot insert a disc. Play CD Please do not insert a disc forcibly when the shut- ter is closed. This may damage a disc or the Play MP3/WMA mechanism of the shutter. CD/MP3/WMA Operations WARNING WXZ466MP... -
Page 16: Pausing Play
When the unit enters the CD/MP3 mode, play starts automatically. If there is no disc loaded, the indication “ NO DISC” appears in the display. WXZ466MP Pausing play 1. Press the [SEARCH] knob to pause play. “PAUSE” appears in the display. -
Page 17: Repeat Play
The [DIRECT] button is valid only when corre- sponding disc indicator is turned on. Top function The top function resets the CD player to the first track of the disc. Press the [DIRECT] button to play the first track (track No. 1) on the disc. -
Page 18: Common Operations
Common Operations CATS function (Clarion Anti- Theft System) This unit can deter theft by checking registered optional PIN (Personal Identification Number). How to register/delete PIN 1. Press the [ADJ] button to switch to the adjust mode. 2. Turn the [SEARCH] knob to select “CODE”. -
Page 19: Setting The Clock
∗ Up to 30 characters can be entered. ∗ The factory default setting is “Welcome to Clarion”. 1. Press and hold the [DISP] button for 1 sec- ond or longer to switch to the display adjust mode. -
Page 20: Dimmer Control
“DIMMER”. 3. Turn the [A-MODE] knob to select “ON” or “OFF”. 4. Press the [DISP] button to return to the previ- ous mode. WXZ466MP Adjust Mode Anti-theft indicator The red Anti-theft indicator is a function for detering theft. The disc indicator of the [DIRECT] button “2”... -
Page 21: Entering Titles
This unit requires special wiring to mute the au- dio signal automatically when a cellular tele- phone rings in the car. ∗ This function is not compatible with all cellular tele- phones. Contact your local authorized Clarion dealer for information on proper installation and compatibility. AUX function... -
Page 22: Operations Of Accessories
• If a CD-text CD is not input its disc title or a track title, “NO TITLE” appears in the display. WXZ466MP Procedure to scroll a title Set “SCROLL” to “ON” or “OFF”. (The factory default setting is “ON”. Refer to the subsection “Setting the method for title scroll”... - Page 23 This function continues automati- cally until it is cancelled. 1. Press and hold the [RDM] button for 1 sec- ond or longer. 2. To cancel disc random play, press the [RDM] button again. WXZ466MP...
-
Page 24: Tv Operations
Turn the knob right to auto- matically tune up the frequency band to the next available TV station; turn the knob left to automatically tune down. WXZ466MP Manual tuning There are 2 ways available: Quick tuning and step tuning. - Page 25 DIVER”. 3. Turn the [A-MODE] knob to select “ON” or “OFF”. ● ON: Sets the diver setting to ON. ● OFF: Sets the diver setting to OFF. 4. Press the [ADJ] button to return to the previ- ous mode. WXZ466MP...
-
Page 26: Trouble Shooting
1. Check the speaker connection. 2. Turn down sound volume. Function can also be restored by turning the power off and on again. 3. If the sound is muted again, consult Clarion dealer. Press the [Q] button to avoid the trouble. - Page 27 Wrong filename File system is not correct. Measure Use MP3/WMA files encoded properly. Let dry for about 1 hour with the power on. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. WXZ466MP...
-
Page 28: Error Displays
Parental level error ERROR R Region code error If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult Clarion dealer. WXZ466MP Cause Replace with a non-scratched disc. -
Page 29: Specifications
Dimensions / Source unit: 7” (Width) ✕ 4” (Height) ✕ 6-5/16” (Depth) [178 (W) ✕ 100 (H) ✕ 160 (D) mm] Dimensions / Remote control unit: 1-3/4”(Width) ✕ 4-7/16”(Height) ✕ 1/2”(Depth) [44 (W) ✕ 113 (H) ✕ 13 (D) mm] WXZ466MP... - Page 30 Clarion Co., Ltd. PE-2757K 2005/11 280-8289-00 All Rights Reserved. Copyright © 2005: Clarion Co., Ltd.