Sanyo CE21C6-C Service Manual page 7

SERVICE ADJUSTMENTS
ADJUSTABLE SERVICE ADJUSTMENT
IMPORTANT NOTICE
Do not attempt to change the data value of service items not listed in the table below otherwise it may cause loss
of performance and product safety. If you can not restore the data value of each service item, please initialize the
memory IC following to the below description "INITIALIZATION OF MEMORY IC" and re-adjust all of service
adjustments.
[Image]
Item No. OSD
01 P V-P
02 P H-P
03 P V-L
04 P VSC
05 P V-S
[Regular]
Item No. OSD
1 AGC
2 --
3 GRY
4 CTR
5 SCR
6 OSD
Exit from the Service Mode
+ Press the RECALL
[INITIALIZATION OF MEMORY IC]
To initialize the memory IC (IC803), press and hold the "NORMAL"
on the front control panel, and then turn the Mains switch Off and On. Now the initialization is completed.
When initialized the memory IC, all of the setting data (option setting data and service adjustment data) stored in
the IC are reset to the default value. It is necessary to set the option setting and readjust the service adjustments
listed on the above.
Description
P Vertical Position Adjustment
P Horizontal Position Adjustment
P Vertical Linearity Adjustment
P Vertical S-Correction Adjustment
P Vertical Size Adjustment
Description
AGC Adjustment
Cut-off Adjustment
Grey Scale Adjustment [White Balance]
Contrast Adjustment (Factory use, use default setting data)
Screen adjustment (Factory use, use default setting data)
On-screen Display Positioning Adjustment
button or turn off the TV set by using the Mains switch.
?
button and then press the P
7
button
EB6-D chassis