Table of Contents
Advertisement
SERVICE ADJUSTMENTS
[SERVICE ADJUSTMENT]
Note: Some items of the service adjustments for this chassis are controlled by the CPU, IC801, and the
adjustments are carried out by using the RC handset.
IMPORTANT NOTICE
Do not attempt to adjust service adjustments not listed below otherwise it may cause loss of
performance and product safety.
To enter the Service Mode
+ Press and hold the "GREEN" button and the P
displayed on the screen.
Image
To select the mode and service item and change data value
+ Select the desired adjustment mode (Image or Regular mode ) by using the P
the Volume + (RIGHT) button.
+ To select the adjustment item, use the P
+ To change the service data, use the Volume -(LEFT) or Volume + (RIGHT) button.
+ The data which is set in the service mode is stored into the memory IC automatically.
Image mode
Image
01 P V-P
Adjustment No.
and Item name
EB6-D chassis
button on front control panel. The adjustment item will be
The available adjustment items are as follows;
Image
Regular : This can be adjusted for the service adjustment.
other
TB1251 : This is for the factory setting. Do not adjust.
* Do not adjust items in the "other" and "TB1251" otherwise
the TV set may not operate properly.
or P
button.
05
Adjustment Data
6
: This can be adjusted for picture images/shapes.
: This is for factory setting. Do not adjust.
or P
Regular mode
Regular
01 AGC
Adjustment No.
and Item name
button and then press
2A
Adjustment Data
Advertisement
Table of Contents
