Table of Contents
Advertisement
Quick Links
CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
For canceling the display demonstration, see page 8.
Para cancelar la demostración en pantalla, consulte la página 8.
Pour annuler la démonstration des affichages, référez-vous à la page 8.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
KD-S31
KD-S31
KD-S31
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information for
future reference.
Model No.
Serial No.
GET0250-001A
[J]
Advertisement
Table of Contents
Related Manuals for JVC KD-S31J
Summary of Contents for JVC KD-S31J
- Page 1 CD RECEIVER RECEPTOR CON CD RECEPTEUR CD For canceling the display demonstration, see page 8. Para cancelar la demostración en pantalla, consulte la página 8. Pour annuler la démonstration des affichages, référez-vous à la page 8. For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado.
-
Page 2: How To Reset Your Unit
• If a disc is loaded, it will eject. Be careful not to drop the disc. Thank you for purchasing a JVC product. How to forcibly eject a disc If a disc cannot be recognized by the receiver or cannot be ejected, ejects the disc as follows. -
Page 3: Table Of Contents
Contents How to reset your unit ... How to forcibly eject a disc ... How to read this manual ... How to use the MODE button ... Control panel — KD-S31 Parts identification ... Remote controller — RM-RK60 Main elements and features ... Getting started ... -
Page 4: How To Read This Manual
How to read this manual The following methods are used to made the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this receiver” (see pages 28 and 29). • Button operations are mainly explained with the illustrations as follows: Press briefly. -
Page 5: Control Panel
Control panel — Display window 1 +/– buttons 2 DISP (display) button 3 Remote sensor • DO NOT expose the remote sensor to strong light (direct sunlight or artificial lighting). 4 Loading slot 5 Display window 6 MODE button 7 0 (eject) button ¢/4 buttons (standby/on/attenuator) button... -
Page 6: Remote Controller
Remote controller — Installing the lithium coin battery (CR2025) • When operating, aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between. Warning: • Store the battery in a place where children cannot reach to avoid risk of accident. -
Page 7: Getting Started
Getting started Ÿ You cannot select some sources if they are not ready. • For FM/AM tuner only ® • For SIRIUS radio only Basic operations ⁄ Adjust the sound as you want. (See pages 18 and 19.) To drop the volume in a moment (ATT) To turn off the power Volume level appears. -
Page 8: Canceling The Display Demonstrations
Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 20. Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock Set the hour and minute. 1 Select “CLOCK H”... -
Page 9: Radio Operations
Radio operations Ÿ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. Listening to the radio To tune in to a station manually In step ! on the left... -
Page 10: Storing Stations In Memory
When an FM stereo broadcast is hard to receive Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off. Storing stations in memory You can preset six stations for each band. -
Page 11: Listening To A Preset Station
Manual presetting Ex.: Storing FM station of 92.5 MHz into the preset number 4 of the FM1 band. Preset number flashes for a while. Listening to a preset station Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station... -
Page 12: Disc Operations
Disc operations About MP3 and WMA discs MP3 and WMA (Windows Media “tracks” (words “file” and “track” are used interchangeably) are recorded in “folders.” • When inserting an MP3 or a WMA disc: Total folder Total track number number Disc information appears automatically (see page 16). -
Page 13: Playing Discs In The Cd Changer
Playing discs in the CD changer About the CD changer It is recommended to use the JVC MP3- compatible CD changer with your receiver. • You can also connect other CH-X series CD changers (except CH-X99 and CH-X100). However, they are not compatible with MP3 discs, so you cannot play back MP3 discs. - Page 14 • When the current disc is an MP3 disc: Selected folder number Folder name Disc information appears automatically (see page 16). Clock Current track number “ROOT” appears if no folder is included in the disc. • When the current disc is an audio CD or a CD Text disc: CD Text: Disc title/performer = Track title appears automatically...
- Page 15 To locate a particular track (for CD) or folder (for MP3 or WMA discs) directly To select a number from 01 – 06: To select a number from 07 – 12: • To use folder search on MP3/WMA discs, it is required that folders are assigned with 2-digits number at the beginning of their folder names—01, 02, 03, and so on.
-
Page 16: Changing The Display Information
While playing an audio CD or a CD Text ( If the current disc is an audio CD, “NO NAME” appears. While playing an MP3 ( • When “TAG DISP” is set to “TAG ON” (see page 21) If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this case, the TAG indicator will not light up. -
Page 17: Selecting The Playback Modes
Selecting the playback modes You can use only one of the following playback modes at a time. Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected while playing an MP3 disc in the receiver Random play Ex.: When “DISC RND”... -
Page 18: Sound Adjustments
Sound adjustments Selecting preset sound modes You can select a preset sound mode suitable to the music genre. Ex.: When “ROCK” is selected Indication pattern for each sound mode: (C-EQ: custom equalizer) Preset values Indication For: BAS * USER (Flat sound) ROCK Rock or disco music... -
Page 19: Adjusting The Sound
Adjusting the sound You can adjust the sound characteristics to your preference. Ex.: When “TRE” is selected Indication pattern changes as you adjust the level. Indication To do: BAS* Adjust the bass. (bass) TRE* Adjust the treble. (treble) FAD* Adjust the front (fader) and rear speaker balance. -
Page 20: General Settings - Psm
General settings — PSM Basic procedure You can change PSM (Preferred Setting Mode) items listed (except for SID) in the table that follows. Select a PSM item. Ex.: When you select “DIMMER” Indications DEMO Display demonstration CLOCK H Hour adjustment CLOCK M Minute adjustment CLK ADJ*... - Page 21 AUTO: Repeats scrolling (5-seconds interval in between). OFF: • Pressing DISP for more than one second can scroll the display regardless of the setting. EXT IN* CHANGER: [Initial]; To use a JVC CD changer, [13]. External input EXT IN: TAG DISP TAG ON:...
-
Page 22: Detaching The Control Panel
Detaching the control panel Attaching the control panel When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. -
Page 23: External Component Operations
External component operations Playing an external component You can connect the external component to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied). • For connection, see Installation/Connection Manual (separate volume). • Before operating the external component, select the external input (EXT IN) correctly (see page 21). -
Page 24: Sirius ® Radio Operations
SIRIUS radio DLP—Down Link Processor (optionally purchased) to the CD changer jack on the rear. • You can also connect the JVC SIRIUS radio PnP (Plug and Play), KT-SR1000 or KT-SR2000, using the JVC SIRIUS radio adapter, KS-U100K (not supplied). By turning on the power of the receiver, you can turn on/off the JVC PnP. -
Page 25: Listening To The Sirius ® Radio
Listening to the SIRIUS Ÿ Select a category. You can tune in to all the channels of every category by selecting “ALL.” Selecting a particular category (SPORTS, ENTERTAINMENT, etc.) allows you to enjoy only the channels from the selected category. radio ®... -
Page 26: Storing Channels In Memory
Storing channels in memory You can preset six channels for each band. Ex.: Storing a channel into preset number 4. Perform steps tune in to a channel you want. Preset number flashes for a while. Listening to a preset channel Select the preset channel (1 –... -
Page 27: Maintenance
Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moisture may condense on the lens inside the CD player in the following cases: •... -
Page 28: More About This Receiver
More about this receiver Basic operations Turning on the power • By pressing SOURCE on the receiver, you can also turn on the power. Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. -
Page 29: General Settings—Psm
Playing an MP3/WMA disc • This receiver can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower). • This receiver can show the names of albums, artists (performer), and ID3 Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files. -
Page 30: Troubleshooting
Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. • The receiver does not work at all. • SSM automatic presetting does not work. - Page 31 Symptoms • Disc cannot be played back. • Noise is generated. • A longer readout time is required (“CHECK” keeps flashing on the display). • Tracks cannot be played back as you have intended them to play. • Elapsed playing time is not correct.
- Page 32 Symptoms • “NO DISC” appears on the display. • “NO MAG” appears on the display. • “RESET 8” appears on the display. • “RESET 1” – “RESET 7” appears on the display. • The CD changer does not work at all. •...
-
Page 33: Specifications
Specifications AUDIO AMPLIFIER SECTION Power Output: 18 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz... - Page 34 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR © 2004 Victor Company of Japan, Limited 1104DTSMDTJEIN...
- Page 35 The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this receiver correctly, have it installed by a qualified technician.
-
Page 36: Electrical Connections
Notas: • Reemplace el fusible por uno con la corriente especificada. Si el fusible se quemase frecuentemente consulte con su concesionario de JVC de equipos de audio para automóviles. • Se recomienda conectar los altavoces con una potencia máxima de más de 50 W (tanto atrás como adelante, con una impedancia de 4 Ω... - Page 37 ENGLISH Typical Connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this receiver. The leads of the power cord and those of the connector from the car body may be different in color. Connect the colored leads of the power cord in the order specified in the illustration below.
- Page 38 • Set “EXT IN” to “CHANGER” (See page 21 of the INSTRUCTIONS.) / Ajuste “EXT IN” a “CHANGER” (Consulte la página 21 del MANUAL DE INSTRUCCIONES). / Réglez “EXT IN” sur “CHANGER” (Voir la page 21 du MANUEL D’INSTRUCTIONS.) JVC CD changer and DLP (Down Link Processor) / Cambiador de CD de JVC y DLP (“Down Link Processor”) JVC / Changeur de CD JVC et Processeur DLP (Processeur de signaux satellite-terre) JVC •...