Introductions; Preparation - JVC KD-R800 Instructions Manual

Preparation

Canceling the display demonstration and setting the clock
• See also page 29.
1
2
Press and hold until the
main menu is called up.
[Turn]
• Repeat this procedure.
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display
• If a station has been assigned a title, station
title appears after about 5 seconds.
• To assign a title to a station, see page 37.
4

INTRODUCTIONS

Turn on the power.
Cancel the display demonstrations
Select <DEMO>, then <Off>.
Set the clock
• Select <Clock>, then <Set Clock>.
Adjust the hour, then press control dial once to proceed to
=
adjust the minute.
[Press]
• Select <24H/12H> (hour), then <24Hours> or
<12Hours>.
• To return to the previous menu, press BACK.
• To exit from the menu, press DISP or MENU.
Audio level meter display
(see <Level Meter> on page 31)