International Electrotechnical Commission (Iec) Statement; Avis De Conformité Aux Normes De L'industrie Canada; Industry Canada Compliance Statement; United Kingdom Telecommunications Requirements - IBM 7133 Series Service Manual

International Electrotechnical Commission (IEC) Statement

This product has been designed and built to comply with (IEC) Standard 950.
Avis de conformité aux normes de l'Industrie Canada
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.

Industry Canada Compliance Statement

This Class A digital apparatus meets the requirements of the Canadian
Interference-Causing Equipment Regulations.

United Kingdom Telecommunications Requirements

This apparatus is manufactured to the International Safety Standard EN60950 and as such
is approved in the U.K. under approval number NS/G/1234/J/100003 for indirect
connection to public telecommunications systems in the United Kingdom.

EC Council Directive

This product is in conformity with the requirements of the following EC directives:
Council Directive 73/23/EEC on the harmonization of the laws of the Member States
relating to electrical equipment designed for use within certain voltage limits.
Council Directive 89/336/EEC on the approximation of the laws of the Member States
relating to electromagnetic compatibility.
Neither the provider or the manufacturer can accept responsibility for any failure to
satisfy the protection requirements resulting from a non-recommended modification of
the product, including the fitting of option cards not supplied by the manufacturer.
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to CISPR 22 / European Standard
EN 55022. The limits for Class B equipment were derived for typical residential
environments to provide reasonable protection against interference with licensed
communications devices.
Properly shielded and grounded cables and connectors (part numbers 07H9163,
07H8985, 32H1465, 88G6404, 32H1466, or 88G6406, or their equivalents) must be
used in order to reduce the potential for causing interference to radio and TV
communications and to other electrical or electronic equipment. Such cables and
connectors are available from the provider or manufacturer. Neither the provider or
manufacturer can accept responsibility for any interference caused by using other than
recommended cables and connectors.

Radio Protection for Germany

Dieses Gerät ist berechtigt in Übereinstimmung mit dem deutschen EMVG vom 9.Nov.
das EG–Konformitätszeichen zu führen.
Der Aussteller der Konformitätserklärung ist die IBM Germany.
Dieses Gerät erfüllt die Bedingungen der EN 55022 Klasse B.
viii
7133 Service Guide