Connections; Connecting The Camera To The Pc; Disconnecting The Usb Cable - JVC GZ-MG67US Software Manual

Connections

Connecting the Camera to the PC

Connect the camera to the PC to copy still
images and video files in a recording medium.
To AC outlet
AC adapter
To DC connector
Camera
1
To assure safety, make sure all units are
turned off before making any connections.
2
Connect the AC adapter to the camera,
then plug the AC adapter into an AC outlet.
If necessary, plug the AC adapter into an AC
outlet with the provided power cord.
3
Turn on the camera.
4
Connect the camera to the PC with the
USB cable.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
Connect the camera directly to the PC, not through
the hub.
Do not use an extension USB cable.
PC
To USB connector
USB cable
To USB connector

Disconnecting the USB cable

Before loading or unloading recording medium or
turning off the PC, first disconnect the USB cable
and turn off the camera.
1
Drop the recording medium
icon on the desktop into the
[Trash] icon.
If the confirmation message
appears, click [OK].
2
Confirm that the ACCESS
lamp on the camera does not
light or blink.
If the ACCESS lamp lights or blinks,
wait until it is turned off before
proceeding.
3
Disconnect the USB cable.
4
Set the camera's power switch to off.
The camera turns off.
– 21 –