Basic Features - JVC GR-SZ7000EG Instructions Manual

12
EN
Zoom-in
Power zoom lever
Zoom-out
Zoom indicator
bar
Zoom level
indicator
RECORDING
FEATURE: Zooming
PURPOSE: To produce the zoom in/out effect, or
an instantaneous change in image
magnification.
OPERATION: 36X Hyper zoom
Digital circuitry doubles the
maximum 18x magnification offered
by optical zoom.
1) To zoom in, slide the Zoom Lever
toward "T".
2) To zoom out, slide toward "W".
180X Hyper zoom
The maximum 180x zoom magnifi-
cation is available through digital
processing when Programme AE is
set to 180x. (
During Hyper Zoom, the speed
NOTES:
increases the further you slide the
Zoom Lever.
Focusing may become unstable
during Hyper Zoom. In this case,
set the zoom while in Record–
Standby, set manual focus or Focus
Lock (
or out in Record mode.
The Zoom Level Indicator ( 5 ) only
moves during optical zoom. Once
the Zoom Level indicator reaches
the top of the zoom indicator bar,
all magnification from that point is
through digital processing.
During digital image processing,
the quality of the image may suffer.
Snapshot (
Auto Select in Fade/Wipe
(
Programme AE is set to 180x.
FEATURE: Quick Review
PURPOSE: To check the end of the last
recording.
OPERATION: 1) Press "
during the Record–Standby mode.
•Tape is rewound for about 2
NOTE: Distortion may occur at start of
playback. This is normal.

Basic Features

pg. 17)
pg. 18, 19), then zoom in
pg. 14), Dissolve and
pg. 23), do not function when
" and release quickly
seconds and played back
automatically, then pauses in
Record–Standby mode for the
next shot.