JVC GR-DVL167EG Instructions Manual page 69

Indications
INSERT ERROR!
INSERT ERROR!
<CANNOT EDIT
ON A LP RECORDED TAPE>
<CHECK TAPE'S ERASE
PROTECTION TAB>
E01, E02 or E06
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
E03 or E04
UNIT IN SAFEGUARD
MODE EJECT AND
REINSERT TAPE
Appears if Insert Editing is attempted on a blank portion of a tape.
Appears if Insert Editing is attempted on a tape recorded in the LP mode.
Appears if INSERT (w) on the remote control is pressed when the erase
protection tab is set to "SAVE".
The error indications (E01, E02 or E06) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Remove the power supply (battery, etc.) and wait a few
minutes for the indication to clear. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest JVC dealer.
The error indications (E03 or E04) show what type of malfunction has
occured. When an error indication appears, the camcorder turns off
automatically. Eject the cassette once and re-insert it, then check if the
indication clears. When it does, you can resume using the camcorder. If the
indication remains, consult your nearest JVC dealer.
Function
69
EN
( pg. 50)
( pg. 50)
( pg. 50)