JVC GR-DVF11U Instructions Manual page 47

MENU/BRIGHT Dial
Display
48kHz MODE FULL SOUND
32kHz MODE SOUND1
4 SYNCHRO 0 . 0
INDICATION ON
DISPLAY ON
TIMECODE OFF
END
48kHz MODE FULL SOUND
32kHz MODE SOUND1
4
SYNCHRO 0 . 0
INDICATION ON
DISPLAY ON
TIMECODE OFF
END
VCR
(Recording deck)
Playback Menu
TV
ADJUSTMENT OF VCR/CAMCORDER
TIMING
4
Point the remote control at the camcorder's remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press MENU/BRIGHT. The Playback Menu appears.
5
Move the highlight bar to "SYNCHRO" by rotating
MENU/BRIGHT, then press it. The value for
"SYNCHRO" is highlighted.
6
Based on the diagnostics performed (
can now increase the VCR's speed by rotating
MENU/BRIGHT downward. You can also slow down
the VCR's speed by rotating MENU/BRIGHT upward.
The adjustment range is from –1.3 to +1.3 seconds, in
0.1-second increments.
7
Press MENU/BRIGHT twice.
Now perform Random Assemble Editing beginning
with step 4 on page 43.
NOTES:
Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
47
EN
pg. 46), you