Program Ae With Special Effects - JVC GR-DV2000ED Instructions Manual

36
RECORDING
EN
IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Fade/Wipe Effects
( pg. 35). If an unusable mode is selected, its
indicator blinks or goes out.
Power Switch
Lock Button
MENU Wheel
Display
SHUT T ER 1/100
SPORT S
SNOW
SPOT L G I HT
TW I L I GHT
SEP I A
MONOT ONE
CLASS I C F I LM
STROB E
SLOW 1
SLOW 2
Advanced Features For Video And D.S.C. (cont.)
Shooting
Mode Switch
PROG.AE Button
Menu Screen

Program AE With Special Effects

1
Set the Power Switch to "
the Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select "
AE", then press it.
4
Rotate the MENU wheel to select the desired mode,
then press it. Selection is complete.
5
Press the MENU wheel again. The Menu Screen
closes.
6
Press PROG.AE so that the selected effect indicator
appears.
To Deactivate The Selected Mode . . .
.... press PROG.AE again so that the effect indicator
disappears.
NOTE:
Program AE with special effects can be changed during
recording or during Record-Standby.
" while pressing down
PROGRAM