Setting Up Your Monitor - Lenovo Y25-30 User Manual

Setting up your monitor

This section provides information on how to set up your monitor.
Connecting and turning on your monitor
Note: Be sure to read the Safety information on page iv before carrying out this
procedure.
1. Power off your computer and all attached devices, and unplug the computer power cord.
2. Connect the cables according to below icon indication.
3. Connect one end of the DP cable to the DP connector on the back of the
computer, and the other end to the DP connector on the monitor. Lenovo
recommends that customers who require to use the Display Port input on their
monitor purchase the "Lenovo Display Port to Display Port cable 0A36537".
www.lenovo.com/support/monitoraccessories
DP
DP
Chapter 1.Getting started 1-4