12 Extending the case with other devices
To extend the functions available during training – whether using the case as a
LUXORliving smart home system or KNX system – further KNX or LUXORliving
devices can be connected to the "BUS Input" XLR socket using an XLR plug.
In KNX mode, KNX devices from competitors can naturally also be connected and
operated.
Only devices complying with the safety extra-low voltage guidelines for
KNX bus and KNX auxiliary voltage may be connected.
In LUXORliving mode, it is not possible to integrate third-party devices.
Other LUXORliving devices (e.g. H6 24 V, J1, S1, D1 and H1 flushed-
mounted actuators, andw LX media couplers) can however be connected
via this socket.
Manual for the case
Extending the case with other devices
24