Table of Contents
Advertisement
SCP-PMU712-020-08H
Test Access Screen
This screen allows you to perform test access on channels for the units installed in the shelf.
1
At the MAIN submenu, select the Test Access option and press
2
to the desired slot and press
TAB
3
As an example, the MUX1 was selected. This test scenario selects one DS0 from one of the DS1s and makes
it accessible as a Voice Frequency (VF) drop on the front panel of the PMU:
4
Select the ENABLE TEST ACCESS button and press
has started as shown in
PMU-712 List 2
.
ENTER
Figure 23. Test Access Selection Screen
Figure 24. MUX1 Test Access Screen
Figure
24. To resume screens press
March 1, 2004
Provisioning, Performance Monitoring and Testing
to view the submenu.
ENTER
. A message will flash that the Test Access
ENTER
.
ENTER
35
Advertisement
Table of Contents
