Table of Contents
Advertisement
LTPH-SM-1052-04
Step
Procedure
1
Install a mounting bracket on each side of the HMS-358 chassis using the four (6-32 x
provided for each bracket. Mounting brackets and screws are contained in the installation kit. Apply
the amount of torque specified by local codes.
2
Align the chassis mounting bracket holes with the rack's vertical mounting holes. The rack's
mounting holes should be spaced
bracket holes.
3
Mount the chassis in the rack. Install four each 12-24 x
chassis to the rack. Apply the amount of torque specified by local codes.
?
Installer Signature
HMS-358 List 5 and List 6
1
1
/
inch or 1-
/
inches apart to properly align with the mounting
2
4
1
/
screws in each bracket and secure the
2
July 14, 2002
Mounting the Chassis
Installer Check ü
H
3
/
) screws
16
H
H
Date
7
Advertisement
Table of Contents
