FUEL TANK/GOVERNOR ARM/CONTROL BASE
3. FUEL TANK CAP
(U/UT/U1/UT1 TYPE)
a. DISASSEMBLY/REASSEMBLY
REMOVAL:
1. Turn the fuel tank cap counterclockwise 180 degrees to unlock
it and remove the cap from the fuel filler neck.
2. Turn the fuel level gauge to align the fuel tank cap tether hole
with the cutout of the fuel filler neck
3. Remove the fuel level gauge from the fuel filler neck.
While removing the fuel level gauge, put the fuel tank cap
close to the fuel level gauge to slacken the fuel filler cap tether.
INSTALLATION:
1. Lower the ring of the fuel tank cap tether to the fuel filler neck.
2. Set the fuel level gauge to the fuel filler neck by aligning the
fuel tank cap tether hole with the cutout of the fuel filler neck,
and then turn the fuel level gauge 90 degrees in the reverse
order of removal.
While installing the fuel level gauge, put the fuel tank cap close
to the fuel level gauge to slacken the fuel filler cap tether.
3. Set the fuel tank cap to the fuel filler neck by aligning the
projections of the cap with the cutouts of the fuel filler neck,
and turn the fuel tank cap clockwise 180 degrees to lock it.
7-4
gx120k1_gx160k1_gx200
GX120K1•GX160K1•GX200