Echo Shindaiwa HT235 Operator's Manual page 23

HT235
1. STOP Switch
Move STOP switch (A) to the
rear (towards the grip) to the "I"
or ON position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
3. Recoil Starter
Place the unit on a flat, clear
area. Grip the support handle
securely with one hand, and pull
the recoil starter handle (D) until
engine starts.
Note: If engine does not start
after 2-3 pulls, use "Start
Cold Engine" Procedure.
X7712240502
© 06/22 ECHO Incorporated
OPERATION
A
C
D
23