Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
8 Dismantling and fitting, general / 8.1 Introduction
Definition of terms
¡
Suspension point
Defined loading point on a component or an assembly (blind hole thread, eyelet, lug).
¡
Assembly device
Devices that are fitted on the turbocharger in order to obtain a suspension point. As-
sembly devices are specially constructed and designed for the defined use; they are not
commercially available products. Use assembly devices only for the described applica-
tions.
¡
Lifting gear
Equipment for the lifting and transporting of loads (ropes, chain block, crane). Lifting
gear is not supplied by ABB.
Swivel lifting eyes to be used
Two swivel lifting eyes are required for the safe lifting of loads, these are not supplied by
ABB Turbo Systems.
Fig. 31: Swivel lifting eyes
Product
Thread M
A150
A155
Table 34: Swivel lifting eyes
© Copyright 2019 ABB. All rights reserved.
Length L
[mm]
M8
13 mm
M16
21 mm
M8
13 mm
M16
21 mm
HZTL4032_EN
Minimum load limit
[kg]
75 kg
1000 kg
150 kg
1400 kg
Rev.N
Quantity
3
2
3
2
October 2019