Installing The Replacement Turbocharger; Installing The Replacement Cartridge Group; Fitting The Cover Plate - ABB HT592670 Operation Manual

Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
14 Taking out of operation at short notice / 14.2 Installing the replace-
ment turbocharger
14.2

Installing the replacement turbocharger

To enable you to quickly put an engine back into operation after a turbocharger has sus-
tained damage, ABB Turbo Systems recommends having a replacement turbocharger or ap-
propriate spare parts available in storage. The defective turbocharger can be removed and
the replacement turbocharger installed within a short period of time.
Remove defective turbocharger (see chapter
u
Install replacement turbocharger (see chapter
u
Send the defective turbocharger to an ABB Turbocharging Service Station for inspection
u
and repair.
14.3

Installing the replacement cartridge group

14.4

Fitting the cover plate

Remove turbocharger (see chapter
u
¡
Gas outlet casing removed
Fit the turbine casing with the gas outlet casing into the gas pipe again.
u
Attach the cover plate (see following section).
u
¡
Gas outlet casing not removed
Fit the turbine casing into the gas pipe and on the gas outlet casing again.
u
Attach the cover plate (see following section).
u
© Copyright 2019 ABB. All rights reserved.
Removing and Installing
Removing and Installing
Removing and Installing
HZTL4032_EN
→10).
→10).
→10).
Rev.N October 2019