Table of Contents
Advertisement
Projector Security Features
Entering a Password to Use the Projector
When the password screen is displayed, enter the correct password.
a
Enter the password using the [Enter] button and arrow buttons on the
remote control.
To select numbers from 5 to 9, press the
The password screen closes.
b
If the password is incorrect, you see a message and a prompt to try
again. Enter the correct password to proceed.
Attention
• If an incorrect password is entered five times in succession, the message
"The projector's operation will be locked." is displayed for approximately
5 minutes, and the projector switches to standby mode. If this happens,
disconnect the power plug from the electrical outlet, reinsert it, and turn
the projector back on. The projector displays the password entry screen
again so that you can enter the correct password.
• If you have forgotten the password, make a note of the "Request Code:
xxxxx" number that appears on the screen and contact Epson for help.
• If you continue to repeat the above operation and input the wrong
password 30 times in succession, the message "The projector's operation
will be locked. Contact Epson as described in your documentation." is
displayed and the projector does not accept any more password entries.
Contact Epson for help.
Installing a Security Cable
button.
You can use the security slot on the projector to attach a Kensington
Microsaver Security system as a theft deterrent.
For more details on the Microsaver Security System, see
http://www.kensington.com/.
a
g g Related Links
• "Projector Parts - Rear"
p.10
54
Hide quick links:
Advertisement
Table of Contents
