Table of Contents
Advertisement
Options For Handling and Lifting the Drum (Weighs up to 250lbs)
• Using the control box, or manually adjusting the actuator, simply raise and lower the machine
rather than the drum.
• Using lifting straps with an overhead crane, forklift, engine lift or other device to lift and move the
drum.
• Using a lift strap, use manpower to lift drum while additional person controls the drum.
• Using a skid plate or sheet of metal on the ground may allow you to drag or slide the drum.
First Hex Alignment
• Place drum on ground in front of hex shaft – look into main housing to see hex, then level hex
with drum
• Look through the hex at the other end of the drum, check hex level and alignment
• Lower and raise until hex is level, and rotate shaft until aligned with hex
• Slide drum straight onto hex shaft. Once aligned, there should be little resistance except
the weight of the drum. The drum will stop 3/4 of the way through. Do not force the shaft into
the drum.
A GRACO COMPANY
7
3
7
Advertisement
Table of Contents
