Table of Contents
Advertisement
BASIC OPERATION
66
Playing back
continued
You VTR can automatically read a 16:9 signal from the AV2 input or a prerecorded 16:9 tape. It can
broadcast a 16:9 signal through a 21 pin scart cable.
Format 16:9 (Wide Screen)
1
2
DISPLAY
COUNT.RST
3
F.ADV
CLR/RST
4
CURSOR
5
OK
AUDIO
6
32
Press MENU on the remote control.
Result : The programming menu is displayed.
Press the correspondiing ›, ‚ or ¥, Š buttons to select the
USER SET option.
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
›‚ ¥Š
OK
END:
MENU
Press OK button to select this option.
Result : The USER SET menu is displayed.
Press the correspondiing › or ‚ buttons until the FORMAT
16:9 option is selected.
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
FORMAT 16:9
:AUTO
NICAM
:ON
ECO.MODE
:OFF
›‚
Š
END:
MENU
Press Š button to select AUTO
0N
OFF.
AUTO
Set when you used a wide TV. The VTR detects wide
TV Programmes and normal TV programmes
Automatically when playing back and recording.
ON
The VTR always plays back and records in the
mode compatible with 16:9 wide screen. Set if
the VTR cannot detect wide TV programmes with
"AUTO" set.
OFF
Set if you do not use a wide TV.
On completion, press MENU twice to exit the menu.
66
BASIC OPERATION
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the required system standard.
Otherwise, the system automatically select the reception standard when you select AUTO.
Selecting the Colour Mode
1
2
DISPLAY
COUNT.RST
3
F.ADV
CLR/RST
4
CURSOR
5
OK
AUDIO
6
Note:
When playing back a cassette, the standard is automatically
selected by the VTR.
(Even though you already selected a manual system)
When you playback an NTSC-recorded tape on this VTR make a
setting on the colour system according to yur TV. If your TV is a
PAL system only TV, set NTPB. If your TV is Multi system TV
(NTSC 4.43 compatible), set NT 4.43 and you can record NT
4.43.
Press MENU on the remote control.
Result : The programming menu is displayed.
Press the correspondiing ›, ‚ or ¥, Š buttons to select the
USER SET option.
PROG
OPTIONS
INSTALL
BONUS
LANG
CLOCK
USER SET
›‚ ¥Š
OK
END:
MENU
Press OK button to select this option.
Result : The USER SET menu is displayed.
Press the correspondiing › or ‚ buttons until the COLOUR
SYSTEM option is selected.
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
FORMAT 16:9
:AUTO
NICAM
:ON
ECO.MODE
:OFF
›‚
Š
FIN:
MENU
Press Š button to select AUTO
PAL
B/W
When playing back a cassette, the system
AUTO
standard is automatically selected by the VTR.
Black and White
B/W
On completion, press MENU twice to exit the menu.
33
Advertisement
Table of Contents
