Table of Contents
Advertisement
2.2 LEDs Controlled by IE-703204-G1-EM1
Some of the LEDs mounted in the IE-V850ES-G1 are controlled by the IE-703204-G1-EM1.
For the LEDs that are controlled by the IE-V850ES-G1, refer to the IE-V850ES-G1 User's Manual (U16313E).
(1) Reset LED
The status of the RESET signal connected to the target system is indicated as follows.
Lit (ON):
The target system is connected and the RESET signal is active (GND level).
Unlit (OFF): Either the target system is not connected, or the RESET signal is inactive (V
(2) Target V
supply voltage <1>
DD
The status of the V
signal connected to the target system is indicated as follows.
DD
(This LED indicates the status of pin 11 during V850ES/SA2 emulation, and the status of the F3 pin during
V850ES/SA3 emulation.)
Lit (ON):
The target system is connected, and voltage is being applied to the V
Unlit (OFF): Either the target system is not connected, or voltage is not being applied to the V
(3) Target V
supply voltage <2>
DD
The status of the V
signal connected to the target system is indicated as follows.
DD
(This LED indicates the status of pin 19 during V850ES/SA2 emulation, and the status of the H2 pin during
V850ES/SA3 emulation.)
Lit (ON):
The target system is connected and voltage is being applied to the V
Unlit (OFF): Either the target system is not connected, or voltage is not being applied to the V
CHAPTER 2 PART NAMES AND FUNCTIONS
Figure 2-2. LEDs Controlled by IE-703204-G1-EM1
Reset LED
Target V
supply voltage <1>
DD
Target V
supply voltage <2>
DD
TARGET
POWER
User's Manual U16622EJ1V0UM
level).
DD
pin.
DD
pin.
DD
pin.
DD
pin.
DD
19
Advertisement
Table of Contents
