IE-78K0-NS-P04, IE-1615-NS-EM4
1.4 Notes on Use of IE-78K0-NS-P04 and IE-1615-NS-EM4
(1) Ensure that the power supply for the IE-78K0-NS-A and the target system is OFF before connecting
or disconnecting to/from the IE-78K0-NS-A and the target device, or changing switch settings, etc.
(2) When carrying out target device emulation using the IE-78K0-NS-P04/IE-1615-NS-EM4 in conjunction
with the IE-78K0-NS-A, there are certain differences from the operation of the actual device (see
Differences from Target Device).
(3) The target system V
(4) Power on sequence:
1. Power on IE-78K0-NS-A
2. Power on target hardware
3. Start debugger ID78K0-NS
(5) Power off sequence:
1. Exit from debugger ID78K0-NS
2. Power off target hardware
3. Power off IE-78K0-NS-A.
16
must be between 4.0 V and 5.5 V.
DD