Page 1
5.1 Home Theater System with Bluetooth User’s Guide for Model MHTB142 v2952-01 For the most up-to-date version of this User’s Guide, go to www.memorex.com...
Page 2
Safety Instructions & Warnings Important Safety Instructions FCC Warnings • Read these Instructions. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the • Keep these Instructions. user’s authority to operate the equipment. •...
Page 3
Battery Warnings WARNING: To reduce the risk of electric CAUTION RISK OF ELECTRIC SHOCK shock, do not remove cover (or back). No DO NOT OPEN • WARNING: Do not ingest battery, Chemical Burn Hazard. user-serviceable parts inside. Refer servicing ATTENTION •...
Subwoofer Front View Pair Power/Source With the unit powered ON Press to power ON. Press and hold to manually POWER/SOURCE PAIR Press and hold to power OFF. pair to a Bluetooth device. Press to switch between 5.1 With the unit powered OFF, CH, Aux In, and Bluetooth press to begin using the modes.
Remote Functions Note: When using the remote, be sure to aim at the remote signal receiver located on the front of the subwoofer. Power Mute Press to power the Press to mute system ON or place it the volume. in Standby Mode. Pair/Play/Pause Press and hold to begin pairing to a...
Audio Inputs 2 Port Stereo RCA Inputs (Aux) If your TV, DVD, or other media player has a 3.5mm audio line output, use the top 2 audio inputs (Left/Right channel) on the rear of the subwoofer for stereo audio. While connected to the Aux inputs, the unit will send audio signal to all of it's speakers to simulate a surround sound effect.
Audio Inputs 6 Port 5.1 Surround Sound RCA Inputs (5.1 CH) To use the 5.1 input on this system will require a source (TV, DVD, Blu-Ray, or other media player) with 5.1 Surround Sound analog audio outputs. If your media source is so equipped, use the lower 6 audio inputs on the rear of the subwoofer.
Note: Not all functions of the system will be available through your own remote control, such as bass and treble. Use the included remote for these functions. While your MHTB142 home theater system is able to learn most IR protocols, not all can be programmed.