Chrysler Pacifica Hybrid 2022 Manual page 33

NOTE:
If the vehicle enters Fuel and Oil Refresh Mode to
maintain engine lubrication, adding fuel will not
exit the mode sooner.
If the vehicle enters Fuel and Oil Refresh Mode to
maintain engine lubrication properties, the engine
may run for a period of up to 20 minutes when fully
warm whenever the vehicle is operational (no
electric only operation). If the vehicle is shut down
None – With vehicle ignition ON
Max Vehicle Speed
Start Up Fuel Alert message
Early Low Fuel Alert Message
ParkSense
Blind Spot
Forward Collision Warning
before conditions to exit the refresh mode have
been satisfied, the engine may run for additional
time on subsequent trips.
NOTE:
Frequent short trips at low ambient temperature
conditions are more likely to trigger the lubrication
based mode.
Setting
GETTING TO KNOW YOUR INSTRUMENT PANEL
K
EY
I E
F
When the KeySense key is in use there will be:
With KeySense in use there will be multiple
associated messages shown in the following table:
Instrument Cluster Display Message
"KeySense in use. Max vehicle speed set to xx MPH/or km/h"
"Max speed reached. KeySense in use" supported by a chime

"Approaching max speed xx MPH/km/h" supported by a chime

"Range to empty xxx miles or km"
"Fuel Low"
"Feature cannot be disabled. KeySense in use"
"Feature cannot be disabled. KeySense in use"
"Feature cannot be disabled. KeySense in use"
S C M
ENSE LUSTER ESSAGES
QUIPPED
Continuous, dedicated telltale

Unique Display Splash Screen

31
—
3