Miele KMR 1124 LP Operating And Installation Instructions page 45

KMR 1134
Position



For all other rangehoods, please consult the manufacturers specifi-
cations for required distances.
Please observe safe distances to rear combustible surfaces of 12" (305 mm) clearance. For
zero clearance installation the Miele Backguards will satisfy the required distance to com-
bustible surfaces. The Miele Backguard is available in 12" (305 mm) or 20" (508 mm)
heights.
Dimensions
min. 36"
(915 mm)
6" +  + 6"
(150 mm +  + 150 mm)
37" (940 mm)
36" (915 mm)
30" (762 mm)
Dimensional drawings
Description
Width of cabinet opening
If combustible materials are
present, an additional minimum
distance of 6" (150 mm) (each side)
is required. Make sure that the lo-
cal codes are observed.
Minimum distance between the top
of the cooking area and the bottom
of an unprotected combustible sur-
face.
Minimum distance between the top
of the cooking area and the bottom
of the Miele rangehood (DAR
model with DRxB XL blower).
Minimum distance between the top
of the cooking area and the bottom
of the Miele rangehood (DAR
model with DRxB XXL blower).
45