Panasonic KX-TGD663 Operating Instructions Manual page 52

Using Bluetooth® Devices
2
Handset:
MMENUN#621
3
If your headset PIN is "0000", go to
step 4.
If your headset PIN is not "0000",
press MCLEARN, then enter your
headset's PIN.
R Typically, default PIN is "0000". Refer
to the headset's operating instructions.
4
Press MOKN, then wait until a long beep
sounds.
5
MOFFN
R When the Bluetooth headset is ready
for use, the HEADSET indicator on the
base unit lights up.
Connecting/disconnecting a
Bluetooth headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the handset.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
1
To connect/disconnect:
MMENUN#622
R A long beep sounds.
2
MOFFN
Unpairing a Bluetooth headset
You can cancel a pairing of the headset that is
stored to the base unit.
1
MMENUN#612
2
MbN: "Yes" a MSELECTN
R When the headset is unpaired, the
HEADSET indicator is turned off.
3
MOFFN
For assistance, please visit http://shop.panasonic.com/support
52
TGD66x(en)_0420_ver020.pdf
Operating a Bluetooth headset
using a landline
Important:
R Refer to your headset's operating
R Some features described here may not be
Answering landline calls with your
headset
To answer a landline call, press your
headset's button.
When you finish talking, press your headset's
button.
Note:
R If you cannot hang up the call using your
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
n While the handset is on a landline call:
n While your headset is on a landline call:
Note:
R This function may not operate properly
Switching between the base unit and
your headset
You can switch from the base unit to your
headset while listening to messages recorded
on the base unit answering system.
R You can only switch from the base unit to
n To switch to your headset:
52
instructions for details.
available depending on Bluetooth headset.
headset, press M N (STOP) on the base
unit.
sharing mode to on beforehand (page 40).
To join the conversation with your headset,
press your headset's button.
To join the conversation with the handset,
press M N.
depending on specification of the headset.
your headset.
Press your headset's button.
2021/04/21 17:05:38