HP aruba 9300-32D Series Installation And Getting Started Manual page 30

1. Use a screwdriver and attach the front-post and rear-post rack mount brackets to the switch with the
included 6-mm M4 screws.
Figure 1 Attaching four-post mounting brackets to the switch
2. Attach the rack slides to the sides of the switch using ten 6-mm M4 screws on each side.
Aruba 9300-32D Switch Series | Installation and Getting Started Guide
For safe, reliable installation, only use the screws provided in the accessory kit to attach the
mounting brackets to the switch.
30