Interior Adjustments - U-Line UHWD524-SG01A User Manual & Service Manual

USER GUIDE

Interior Adjustments

Dual Zone Wine Captain
®
rack supports with 17 adjustment positions.
Dual Zone models ship with 6 racks. Remove and
reposition racks as desired to accommodate a variety of
bottle sizes and shapes.
WINE RACK & SHELF ADJUSTMENT
Removal
1. Fully extend empty rack
2. Firmly grasp both sides of rack and lift front end of
rack slightly (about 1/4") to center the pin in the slot.
3. Pull rack towards you until all pins are clear of the
slots. If only repositioning the rack, do not remove
completely - go to "Rack Installation" Step 2.
4. Slightly tilt one side. Gently pull rack towards you to
remove rack from unit.
Note: Take care when removing rack to avoid
scratching interior of unit.
Interior Adjustments
models feature side mounted
Center
the pin
5. Once removed, retract the slides.
Note: The slides on the rack have a thin coating which
is used to block moisture and provide lubrication. Use
care when handling.
Installation
1. Insert empty rack into unit with one side tilted slightly
downward until back pin is between front and rear rail
supports.
2. Tilt rack back to horizontal and line up 2 back pins
with back slots.
Center
the pin
Back Pin
3. Line up 2 back pins with 2 back slots and 2 front pins
with 2 front slots.
4. Continue inserting rack until all four pins are fully
inserted. Front of rack will set down slightly into the
Center
front slots and be locked into position.
the pins
Center
WINE RACK BOTTLE POSITION
the pin
Center
the pin
Back Pin
Specially designed horizontal wine racks properly position
the bottles so the wine remains in contact with the cork,
which ensures the cork does not become dry.
Racks are designed to accommodate typical 750ml wine
bottles as follows:
UHWD524 24" Wine Captain Models
20
u-line.com
Center
the pins
Center
Front Pin
the pins
Back Pin
Front Pin
Back Pin
Back Pin
7 Bottles
Front Pin
Center
the pins
Center
the pins
Fro