Advertisement
4.
4.
Insert the IQtools CD into the CD drive of the PC. The IQfinder
installation application will launch automatically. Click the "Check
if this PC is ready to view IQeye cameras" button.
5.
5.
If the "Congratulations! Java version..." message is displayed,
Click "OK". Go to step 8.
6.
6.
If the message "The computer does not have the necessary
version of Java..." is displayed, click "Yes" to install the Sun
Java VM. Note: you will require administrative privileges on
the PC to install the Java VM.
7.
7.
Restart the PC after installing Java and launch the IQtools appli-
cation again.
8.
8.
Click the "Scan for IQeye
cameras on my network"
button to find IQeye cameras.
9.
9.
The detected cameras will
be displayed in the IQfinder
window. Highlight a camera
from the list and click the
"Edit" button to edit the
selected camera's IP settings.
10.
10.
The Edit window allows the Name, IP
address, Subnet, and Gateway of the
camera to be changed. It also allows
the camera to be configured for DHCP.
Click the "Apply" button after making
the desired changes. Note: Changing
between a static IP address and DHCP
will require the camera to be rebooted.
11.
11.
To view a camera "Double
click" on a camera entry in
the list or click the "Open"
button. The "Live" page will
be displayed. Note: It's also
possible to open Internet
Explorer, and enter the IP
address of the IQeye device in the address field of the browser.
12.
12.
To perform further configuration of the camera click on the
"Settings" tab. Note: that the default username is "root" and
the default password is "system".
For further information see the IQeye documentation
on the installation CD or at http://www.iqeye.com.
Advertisement
