User Level Factory Defaults - Aquacal HeatWave SuperQuiet SQ175 Operation Manual

Display
CF1
ULC
ELC
LOC

3.5 User Level Factory Defaults

Certain programming options have been preset at the factory. These options can be overwritten for site-
specific conditions.
CAUTION - Failure to heed the following may result in equipment damage.
Unauthorized adjustments in the Installer Menu (beyond the LOC menu) may void heat pump's warranty.
l
Table 1 - Factory Defaults
CODE
OFF
HEA
COO
ACH
CF1
ELC
ULC
Page - 4
Select water temperature format (in either Celsius or
Fahrenheit).
Enable heat pump lockout feature.
Select passcode to lock the keyboard.
This is a Service Entry Point (not intended for use by the
owner). The LOC code permits service personnel to enter a
factory passcode to access adjustable calibration and site
dependent setup parameters. Service adjustments are
available to authorized installation and service personnel,
only.
DEFAULT
DESCRIPTION
VALUE
Heat Pump is
deactivated.
Set to heat water
to point set on
thermostat.
Set to cool water
to point set on
thermostat.
Set to maintain a
water temperature
set on the
thermostat.
Celsius /
Fahrenheit 1
Selection
Enter Lock Code 0
User Lock Code 0
Description
RANGE
0 = Celsius
1 = Fahrenheit
0 - 99
0 = "User Lock Disabled"
1 = "User Lock Enabled"