Chapter 3. Z-Wave Device Setting; Configuring Z-Wave Device Via Web - Planet Networking & Communication HZS-532E-DE User Manual

Chapter 3.

3.1 Configuring Z-Wave Device via Web

Please refer to the following steps to add Z-Wave device via web.
Step 1. Include a Z-Wave device via web.
a) Go to "Z-Wave" and click "Device
Configuration".
b) Click "Include New Device" and the
screen will appear with "Add Device:
Waiting for a user action."
c) Press the program switch button 3
times within 2 seconds on the
Z-Wave device to connect.
d) If your device has successfully been added, it will show "Add Device: Command has
been completed successfully".
If the device didn't add successfully, please place the device next to the
gateway and try again.
Z-Wave Device Setting
- -
10
Z-Wave Smart Energy Meter
HZS-530 Series