Sony FX 6 Quick Start Manual page 115

Cine EI: EI Presets
Alister Chapman suggests the following setup for the L, M, H EI presets.
Preset H setting exposes Slog 3 normally: using the same EI setting as the same Base Sensitivity
(ISO) setting.
Preset M or L changes the brightness of the LUT. Lowering the EI value below the Base Sensitivity
value will lower the brightness of the LUT, you will then have to increase exposure (open up the iris)
to expose the Slog 3 image correctly.
Base Low Sensitivity (800 ISO):
L: 200 EI/ 4.0 E
M: 400 EI/ 5.0 E
H: 800 EI/ 6.0 E
Base High Sensitivity (12800 ISO):
L: 3200 EI/ 4.0 E
M: 6400 EI/ 5.0 E
H: 12800 EI/ 6.0 E