Chart View; Range Adjustment; Sensitivity Adjustment; Bottom Hardness - Interphase Advantage User Manual

Full Screen Single Frequency Display
Chart View (Depth)
The Advantage's Chart View provides views of the
water beneath your boat. When in this mode, the
Advantage offers a full range of sophisticated features
such as your choice of operating frequency, split screen
zoom, zoom bottom tracking, fish and depth alarms,
bottom hardness (white-line), plus several other
advanced features.
From the Command Center select the "CHART" View
and press the "GO" soft key to bring up the menu
showing the features and adjustments for this view. The
display should be similar to that at top left if the
Advantage is using a single frequency, or similar to the
display at the top right if the dual frequency mode was
selected..

Range Adjustment

Press the button labeled "RANGE" to bring up the Range
Adjustment soft key menu. Press the button labeled
"AUTO" if you would like the Advantage's internal
microprocessor to automatically select and adjust the
depth range as bottom conditions change. To manually
adjust the depth, press either the range button labeled " "
Single Frequency Sensitivity Adjustment
or " " or use the large knob to make the adjustment. If
you make a manual depth adjustment, the AUTO range
mode is turned off and will remain off until the button
labeled AUTO is again selected. Note: when in the
AUTO mode, the soft key labeled "AUTO" will be
shown in reverse video (white on black). To return to the
Chart sub- menu, press the soft key labeled "LAST". (To
return to the Control Center press the soft key labeled
"MENU")

Sensitivity Adjustment

The Advantage allows you to adjust the receiver
sensitivity for the frequency(s) which you have selected
and which are presently being displayed. For example, if
you have previously selected the single frequency 200
kHz mode, you can only adjust the receiver sensitivity for
this frequency, but if you have selected the split
frequency 50/200 kHz mode, you can adjust the receiver
sensitivity for both frequencies. You can only adjust the
receiver sensitivity for whatever frequency is presently
being displayed.
30