Panasonic ULTRAHD DP-UB150 Owner's Manual page 22

 Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
*1 It displays images at the highest resolution available on
your TV.
*2 A high resolution image/display technology of
approximately 4000 (width) x 2000 (height) pixels.
*3 A progressive image recorded at a rate of 24 frames
per second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in accordance
with the film materials.
Audio
„ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
y "Auto" is effective only when playing Dolby
TrueHD.
„ Digital Audio Output
Press [OK] to show the following settings:
 Dolby Audio
 DTS/DTS-HD
 DSD Output Mode
Select the audio signal to output.
y Select "PCM" or "Off", when the connected
equipment cannot decode the respective audio
format. This unit decodes the audio format and
transmits to the connected equipment.
y If you do not make proper settings the audio
may be static or noisy.
y When playing DSD 11.2 MHz format file
regardless of the settings for "DSD Output
Mode", PCM signals are output from HDMI
terminal.
y When "Voice Guidance Settings" is set to "On",
regardless of the setting value of the following
items(Dolby Audio,DTS/DTS-HD,DSD Output
Mode), audio is output with PCM.
y If you set "Voice Guidance Setting" to "On",
these settings will be fixed to "PCM".
 BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If "Off" is selected, the unit outputs the primary
audio only.
Reference

y To enjoy BD-Video that supports Dolby Atmos
®
DTS:X
Connect this unit to an AV amplifier or similar device that
supports it with an HDMI cable, and select the following
settings:
– Dolby Audio: "Bitstream"
– DTS/DTS-HD: "Bitstream"
– BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
„ Downmix
Select the downmix system of multi-channel to
2-channel sound.
y Select "Surround encoded", when the connected
equipment supports the virtual surround
function.
y The downmix effect is not available when "Digital
Audio Output" is set to "Bitstream".
y The audio will be output in "Stereo" in the
following cases:
– AVCHD playback
– Playback of secondary audio (including the
button click sound).
„ DTS Neo:6
2ch (2.1ch) audio is expanded to 7ch (7.1ch).
y This function works when the following
conditions are met:
– Audio recorded at 96 kHz or lower is output.
– "Digital Audio Output" is set to PCM when
audio other than "PCM" is output.
„ Voice Guidance Setting
Voice Guidance reads aloud various on-screen
information, such as menu items, explanatory text,
and currently-selected items. (It is also possible
to display the "Voice Guidance Setting" screen
by pressing and holding the [OPTION] button
for at least 5 seconds while the HOME menu is
displayed.).
y Information is read aloud in PCM audio format.
y When "On" is set, this unit operates in the
manner described below.
– "Dolby Audio" and "DTS/DTS-HD" in "Digital
Audio Output" are fixed to "PCM". ( left)
– "DSD Output Mode" is set to "Off".
- 22 -
®
or