Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi RM-65SD
Summary of Contents for Ryobi RM-65SD
- Page 1 RM-65SD...
- Page 2 - 1 -...
- Page 3 “CHOKE!” position Maximum Oil Level Minimum Oil Level - 2 -...
-
Page 4: "Run"Position
“RUN”position / “STOP” position Blade adapter Half-circle Key Straight blade Spring Washer Blade Centre Bolt - 3 -... -
Page 5: General Safety Rules
THANK YOU FOR BUYING A RYOBI PRODUCT. do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power To ensure your safety and satisfaction, carefully read tools are dangerous in the hands of untrained users. -
Page 6: Before Mowing
AFTER MOWING mower while the engine is running. 18. Mow across the face of a slope, never up or down. Use 1. Always let the mower cool before storing in an extreme caution when changing direction on a slope. enclosed area. Do not mow on excessively steep slopes. -
Page 7: Operation
ADJUSTMENT briskly.(Fig 11). When the engine warms up, move the throttle to the position. Adjust the handle height Stopping engine The handle bracket has two assembly positions. A HIGH • To stop the engine, release the engine stop lever. and a LOW position (Fig 1). The HIGH position will raise the Disconnect the wire from the spark plug to prevent the handle approximately four inches. - Page 8 used oil in a sealed container to your local recycling centre • Pull the recoil starter several times to distribute the oil or service station for reclamation. DO NOT throw it in the • Reinstall the spark plug CAUTION: garbage, pour it on the ground or down the drain. CAUTION: Running the engine with a low oil level can cause •...
- Page 9 STOPPING ENGINE problem. • Move the throttle control lever to the “STOP” position. (Fig.9) - 7 - - 8 -...
- Page 10 NOTE - 9 -...
- Page 11 NOTE - 10 -...
- Page 12 - 11 -...