Water Softening System; Overview Of Water Hardness Settings; Setting The Water Softening System; Special Dishwasher Salt - Bosch SHX78B75UC Use And Care Manual

en-us Water softening system
Water hard-
ness °E
21 - 26
27 - 38
39 - 62
Note: Set the water hardness de-
termined on your appliance.
→ "Setting the water softening
system", Page 24
With a water hardness of 0 - 8 °E
you can dispense with special salt
for dishwashers and switch off the

water softening system.

→ "Switching off the water soften-
ing system", Page 25
9.2 Setting the water
softening system
Set the water hardness on your
appliance.
Determine the water hardness
1.
and the appropriate setting
value.
→ "Overview of water hardness
settings", Page 23
Press
2.
To open the basic settings,
3.
press
a The display shows H:xx.
a The display shows
Press repeatedly until the
4.
right water hardness has been
set.
The value H:00 is set at the
factory.
To save the settings, press
5.
for 3 seconds.
24
Hardness
range
hard
hard
hard
⁠ .
for 3 seconds.
⁠ .
mmol/l
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
9.3 Special Dishwasher
Salt
You can use special dishwasher
salt to soften the water.
Adding dishwasher salt
If the salt refill indicator lights up,
add special dishwasher salt to the
dispenser for salt just before the
cycle starts. The amount of spe-
cial dishwasher salt required de-
pends on the water hardness. The
higher the water hardness, the
greater the amount of salt re-
quired.
NOTICE:
Detergent may damage the water
softening system.
Only fill the dispenser of the
▶
water softening system with

special dishwasher salt.

Special salt for dishwashers can
damage the tub due to corrosion.
To make sure that any special
▶
salt that escapes is washed out
of the tub, add the special salt
to the dispenser for special salt
immediately before the pro-
gram starts.
Unscrew the lid of the salt dis-
1.
penser and remove.
Before the first use: Fill the dis-
2.
penser full with water.
Setting value
H:05
H:06
H:07