Table of Contents
Advertisement
Option Programme
Delay End
You can set a time delay so that the washing
machine will start automatically and finish after a
specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Delay End button to set time
required.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• To cancel the function, the power button should
be pressed.
• Avoid using liquid detergent for this option.
Pre Wash (
)
If the laundry is heavily soiled, the Pre Wash
programme is recommended.
1
Press the Power button.
2
Select a washing programme.
3
Press the Pre Wash button for three
seconds.
4
Press the Start/Pause button.
28
Wi-Fi ( )
When Wi-Fi is connected, the Wi-Fi icon on the
control panel is lit.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected
programme. Press this button until the desired
setting is lit. All rinses use cold tap water.
• Select the water temperature suitable for
the type of load you are washing. Follow the
garment fabric care labels for best results.
Spin
• Spin speed level can be selected by pressing
the Spin button repeatedly.
• Spin Only
1
Press the Power button.
2
Press the Spin button to select RPM.
3
Press the Start/Pause button.
NOTE
• When you select No, it will still rotate for a
short time to drain quickly.
Rinse
Rinse+ (
)
Add rinse once.
EN
Advertisement
Table of Contents
