Intermec AC19 Supplementary Manual

AC19 Compliance Insert
For Users in the United States and Canada
Caution: This marking indicates that the user should read all included documentation before use.
Attention: Ce marquage indique que l'usager doit, avant l'utilisation, lire toute la documentation incluse.
Caution: For use with Intermec Models CN2 and CN2B only. For Power Supply use Intermec Model 073573. No user-
serviceable parts.
Attention: Pour utilisation seulement avec bloc-batterie Intermec modèle 073573. Pour la source d'alimentation, utilisez
Intermec modèle 073573. Il ne contient aucune pièce réparable par l'utilisateur.
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of
accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may
void the compliance of this product and may result in the loss of the user's authority to operate the equipment.
Les utilisateurs de ce produit sont avisés d'utiliser des accessoires et des périphériques approuvés par Intermec Technologies Corporation.
L'utilisation d'accessoires autres que ceux recommandés ou des changements à ce produit qui ne sont pas approuvés par Intermec
Technologies Corporation peuvent annuler la conformité de ce produit et mettre fin au droit qu'a l'usager d'utiliser l'équipement.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
For Users Outside of the United States or Canada
Caution: This marking indicates that the user should read all included documentation before use.
Caution: For use with Intermec Models CN2 and CN2B only. For Power Supply use Intermec Model 073573. No user-
serviceable parts.
Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories
other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user's authority to operate the equipment.
CE Marking: You may refer to the Declaration of Conformity for a list of the EU Directives and Standards that this product complies with.