Table of Contents
Advertisement
System
In this page, user can re-set the IP address of this Switch device. Also you can give
your Switch an
easily-remembered name in "System"-> "System Configuration"->
"Description".
In "System"-> "System Configuration"-> "Web Configuration", set "Idle
Time" will make device automatically log out by the time you set.
Click Yes on the "Firmware Update" will be requested to enter the password
(default is "system") and to specify the location of new firmware (xxxxx.bin).
Simply follow the instructions to update the firmware which a few minutes are
required for the process. During update, don't turn off the power, message
"uploading" will keep showing on the web page.
D-Link Web Smart Switch User Manual
5
Advertisement
Table of Contents
